|
2-WAY BALL VALVES.... Ball Valves are used in a wide variety of high pressure applications. Two factors make them popular. First, a full unrestricted flow that allows no product restrictions through the valve. Second, the three piece design and the removal of a minimal number of bolts allows service to be performed without removing the complete valve from the line.
VNE offers two way ball valves made of T316 (CF8M) stainless steel. PTFE seats are easily removed. Clamp and Weld ends are standard. Other connections are available upon request. 1/2˝ through 4˝ sizes are available. Ball Valves meet FDA and 3A requirements.
| ORDERING SPECIFICATIONS.... |
| |
| Specify: |
- Quantity
- Product description or Part No.
- Size
- Material Type
|
IMPORTANT FEATURES...
- 3 - Piece design - allows valve ends to remain attached while servicing valve body
- Meets 3A and FDA requirements
- 100% Tested
- Valves marked with heat numbers for full identification and traceability
- English hardware
- Maintenance and servicing is made easy with removal of a minimal number of bolts
- Reinforced Teflon® Seats
- PTFE Cavity Filler, fully encapsulated
- Locking device handle
- Air Actuator mounting kits which include ISO-5211 pads are available
- Repair kits are available
| BALL VALVE SPECIFICATIONS.... |
| |
|
| Size: |
1/2˝, 3/4˝, 1˝, 1 1/2˝, 2˝,
2 1/2˝, 3˝, 4˝ |
| Material: |
Passivated 316 Stainless
Steel (ASTM A351, CF8M) |
| Connections: |
Clamp & Weld - other
connections available
upon request |
| Working Pressure: |
1/2˝ - 1˝ 1,000 psi
1 1/2˝ - 2˝ 1,000 psi
2 1/2˝ - 4˝ 600 psi |
| Temperature Rating: |
-65 to 320 Degrees F |
|
